Apply Now    
Job ID:026429
Function:Manufacturing & Operations
Position Type:Full Time
Travel Required:No
Location:Shawnee, OK US
Relocation Provided:No
Remote Work:No
Job Description
Eaton in Shawnee, OK is seeking a full-time Assembly Technician to work 1st shift.
 
Essential Functions:
  • Communicate with peers, area supervisor, and area engineer to ensure a quality product and internal/external Customer satisfaction.
  • Perform scrap and time card entries at the end of each shift.
  • Read and use routing sheets, ATS specifications, and assembly/test instructions and booklets to properly assemble and test hydraulic motors.  Use routing sheets, operating instructions, and surface appearance templates to properly assemble gerolers/geroters.
  • Properly select and assemble a variety of parts involving the pressing of bearings, fitting and alignment of shafts, seating seals, spacers, and retainers.
  • Visually inspect parts for defects and adjust/ align parts for proper fit as needed.
  • Perform supportive maintenance duties such as, but not limited to, Bearing Press oil and filter checks.
  • Properly use and maintain all gauging and assembly equipment.
  • Move materials, as necessary, using forklift or other material-handling devices.
  • Perform cell housekeeping duties on each shift along with provisional standards meeting 5-S requirements.
  • Perform tasks as necessary to meet other ELS requirements, i.e. set-up reduction, CFM, error proofing, etc.
  • Perform procedures necessary to ensure compliance with the Eaton Safety Process and ensure the personal safety of the incumbent including eye safety, hearing conservation, machine safety guards, ergonomic movement, lock out/tag out, MSDS procedures, and OHSA regulations.
  • Assist in maintaining an atmosphere of continuous improvement and team efforts for accomplishing departmental and plant goals.
  • Perform other related duties as assigned by supervisor.
  • Meet standards as communicated by supervisor.
 
Test Stand Operation: (in addition to the above duties, the function of test stand operation is responsible for the items listed below)
  • Select and obtain proper fixtures for performance tests on a variety of hydraulic products.
  • Install units onto fixtures and select and key in prescribed programs to conduct performance tests (PSI, V.E./M.E, etc) on manual and computer numerical controlled test stands.
  • Observe and record instrument readings and any performance failures completely and accurately.
  • Ensure each motor is labeled/packaged completely with appropriate packing material.
  • Maintain all fluid levels and restock all boxing stations at the end of each shift.
  • Ensure the quality of the products by verifying components and observe for leakage where applicable.


Basic Qualifications (Including Educational Requirements)
Basic Qualifications:
 
  • High school diploma or equivalent from an accredited institution required
  • Minimum of 6 months manufacturing or repair experience
  • No relocation benefit is being offered for this position. Only candidates that currently reside within the immediate geographical area of Shawnee, OK will be considered.
  • This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. ‘Green Card Holder’), Political Asylee, or Refugee
 

 Preferred Qualifications:

 
  • Vocational program certification or Associate’s Degree in industrial manufacturing or a similar field
  • Basic computer and data entry skills
  • 2 years’ experience working in a manufacturing or production environment
  • Ability to read, understand and effectively apply information contained in all applicable documents such as operating instructions, dimensional sheets and/or blueprints (including geometric dimensioning and tolerancing)
  • Demonstrate basic mechanical aptitude and understanding of assembly terminology
  • Ability and willingness to work overtime, weekends and any shift as needed. 
 
Physical Requirements
  • Ability to stand, sit and/or walk on a hard surface as well as safely bend, stoop, reach and use ladder up to 8 hours a day, occasionally up to 12 hours per day.
  • Vision to accurately read all necessary production documents and computer monitor screens.
  • Ability to lift 30 pounds frequently and occasionally 50 pounds or more (* essential: lift 30 lbs regularly, not above shoulder height, to the extent that limited jobs with this requirement exist).


Eaton is a power management company with 2015 sales of $20.9 billion. Eaton provides energy-efficient solutions that help our customers effectively manage electrical, hydraulic and mechanical power more efficiently, safely and sustainably. Eaton has approximately 97,000 employees and sells products to customers in more than 175 countries. For more information, visit www.eaton.com. At Eaton, we see things differently. We see opportunities to innovate, go above and beyond, and we work hard because what we do reflects who we are. If you see things differently—if you’re determined, motivated and focused on improving the world around you—then it’s time to see where a career at Eaton can take you. For more information, visit www.eaton.com/careers. Eaton is an Equal Opportunity and Affirmative Action Employer. Eaton is committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law.
Apply Now